In development

COLOURBlue grey1 / 5

Colour directions and scene visualisations. Final colours and details are confirmed against an approved sample.

A study in compact form

X20

A compact direction, carefully explored.

A compact cylindrical vacuum pump design with a matte body and a fine-grain lower section. Its development electrical configuration follows M10.

Exterior designDevelopment enquiry

Exterior & structural IP protection

Key specifications

Dimensions: Ø45.5 × 80 mm
Battery: 1400 mAh
Input / charging: 5 V ⎓ 2 A · USB-C
Material: ABS · design specification
Runtime reference: Approx. 16 min
Surface finish: Matte body · fine-grain lower section
Texture detail: Subtle circumferential transition above the logo

Discuss this design

Exterior reference dimensions. The development electrical configuration follows M10: 1400 mAh, USB-C 5 V ⎓ 2 A and an approximate 16-minute runtime reference. Final performance and sample availability remain subject to project validation.

Design visualisation, subject to sample review.

Tooling has not yet begun. Final configuration and performance remain subject to engineering and prototype validation.

Runtime is an approximate manufacturer reference, not a continuous-operation claim. Actual duration varies with operating mode, load, sealing, valve fit, battery condition and use conditions.

X20 / DESIGN NOTES

Continuity in a compact form.

X20 pairs a continuous cylindrical shell with a matte upper body and a fine-grain lower section. A subtle circumferential texture transition just above the logo creates a considered visual layer without interrupting the compact outline. The top control and four indicator points keep the side surfaces clear, while the change in texture brings quiet detail to the muted colour direction.

Matte body
Fine-grain lower section
Circumferential transition

X20 / DESIGN & STRUCTURAL IP

Protected design. Rights reserved.

The exterior design and internal structure of this project are subject to intellectual property protection. Unauthorised copying, imitation, commercial manufacture or sale incorporating the protected designs is prohibited.

The scope of rights is defined by the relevant intellectual property documents. Contact NULORA for joint development or licensing.

Discuss authorised collaboration